|
| Specifications |
Max. Board Size |
13 x 15.7"(330 x 400mm) |
Number of Probe |
2 Top, 2 Bottom |
Min. Board Size |
2 x 2"(50 x 50mm) |
Max. Board Thickness for Clamping |
0.04-0.12"(1.0 -3.0 mm)†1 |
Repeatable Accuracy |
±0.000118"(±3µm) |
Resolution |
0.000079"(2µm) |
Min. Pad Pitch |
0.002362"(60µm) |
Min. Pad Size |
0.001118"(30µm) |
Test Voltage of Resistance Measurement |
Continuity test : 0-10V Isolation test : 250V(500V/1000V option) |
Test Current of Resistance Measurement |
Continuity test : 2.65 µA-125mA |
Clamp System |
Pneumatic |
Number of CCD Camera |
2 Top, 2 Bottom |
Monitor |
included |
Printer |
internal |
Air Requirements(Pressure, Consumption) |
0.5MPa, 53gal/min.(200Ltr/min.) |
Power Supply
(Single Phase AC200-240V 50/60Hz)†2 |
15A |
Weight |
3527lbs.(1600kg) |
Dimensions |
 |
†1 Board warpage is less than 0.4mm against 100mm.
†2 Power Supply : There is a case incoming current about decuple of amperage rating might pass when power is on. Please choose breaker that will not cause any malfunction by this incoming current.
[System Requirements] Control PC & Monitor
[Software] EMMA2000 is standard, Ask our sales department about our optional software.
[Probe Type] Users can choose one of different types of probes depending on tester models. Please ask our sales for specifications of each probe & PC.
[Operating Conditions] 70-75°F (21-24°C), 30-70% relative humidity, non-condensing, no dust, no vibration, no corrosive gas.
Please click here to view flyer for EHA4033(PDF:676KB) |
|
