|
| Specifications |
Max. Board Size |
24 x 19.7"(610 x 500mm) |
Number of Probe |
2 Front, 2 Rear |
Min. Board Size |
3 x 3"(76 x 76mm) |
Max. Board Thickness for Clamping |
0.236"(6mm) |
Repeatable Accuracy |
±0.000394"(±10µm) |
Resolution |
0.000236"(6µm) |
Min. Pad Pitch |
0.007087"(180µm) |
Min. Pad Size |
0.003"(76µm) |
Test Voltage of Resistance Measurement |
Continuity test : 0-10V Isolation test : 250V(500V/1000V option) |
Test Current of Resistance Measurement |
Continuity test : 2.65 µA-125mA |
Clamp System |
Manual(Tension Clamp) |
Number of CCD Camera |
2 Front, 2 Rear |
Monitor |
not available |
Printer |
external(option) |
Air Requirements(Pressure, Consumption) |
N/A |
Power Supply (Single Phase AC200-240V 50/60Hz)†1 |
8A |
Weight |
1676lbs.(760kg) |
Dimensions |
 |
†1 Power Supply : There is a case incoming current about decuple of amperage rating might pass when power is on. Please choose breaker that will not cause any malfunction by this incoming current.
[System Requirements] Control PC & Monitor
[Software] EMMA2000 is standard, Ask our sales department about our optional software.
[Probe Type] Users can choose one of different types of probes depending on tester models. Please ask our sales for specifications of each probe & PC.
[Operating Conditions] 70-75°F (21-24°C), 30-70% relative humidity, non-condensing, no dust, no vibration, no corrosive gas.
Please click here to view flyer for ELX6146(PDF:489KB) |
|
