MicroCraft
Home Products Company Info Contact Us Support Downloads Global Links
Lineup EMMA MicroJet TDR Software Performance Features
TDR3030

This TDR differential probe is best for measuring Differential Impedance of C4 bump. With rotating feature, cascade probe can be used.
The TDR4033 incorporates a High Accuracy mechanical stage capable of testing fine pitch PCBs.With high-speed packaging right around the corner, the TDR4033 is ready for High Accuracy/Resolution type measurements.
Measurement item: Controlled Impedance, Low Resistance
Testable Terminals: C4 Bump, Pin for PGA, Pad for BGA
Interfaces: Tektronix and Agilent/HP meters
TDR Probe
Excellent in frequency characteristic (over 40 GHz).
TDR Probe
Specifications (1 axis / 2 axis)
Max. Test Area(vacuuming area)
12.6 x 10.6" (320 x 270mm) / 9.6 x 10.6" (230 x 270mm)
Clamping Method
Vacuuming / TDR Multi Clamp
Rotate Radius
325° (In case of Single Probe)
235° (In case of Differential Probe set at 90°)
145° (In case of Differential Probe set at 180°)
Repeatable Accuracy X-Y
±0.0001"(±3µm)
Repeatable Accuracy θ
1°
Impedance Accuracy †1
50Ω±1%
Weight
2156lbs.(980Kg) / 2200lbs.(1000Kg)
Air Requirement : Pressure, Consumption
0.5MPa, 11gal/min.(42Ltr/min.)
Power Supply
Single Phase AC200-240V 6A
Dimensions
System Requirements
TDR System†2
1)Control PC & Monitor
2)TDR tester and Ancillary Equipment
[Tektronix] TDS8200ATDS8000ADSA8000ACSA8000A11801B/C

†1 Holds good within ±2°C of temp. at the time of 50Ω calibration.
†2 Please confirm the specification for each device with our sales.
[Operating Conditions] 70-75°F(21-24°C), 30-70% relative humidity, non-condensing, no dust, no vibration, no corrosive gas.
Please click here to view flyer for TDR4033(PDF:890KB)
PAGE TOP
| about this site | All Rights Reserved Copyright (C) 2004-2006 by MicroCraft K.K.